www.deadharddrive.com

actormw · Officially active! Joined: 07 Dec 2009 Posts: 2

I have a Seagate Barracuda 7200.9 160Gb drive that just stopped working. No noise, clicks, or odd sounds. I think (hope) that it is just the PCB and I'm looking for a replacement.

I have a 200Gb 7200.9 drive but the firmware is about 3 revisions later (3.aah) so I don't think it'll work.

I still need to go buy a set of torx bits before I start swapping boards.
Any chance I'll cause problems by trying the 200Gb drive's board?

Thanks for any tips or leads on finding the right PCB!
AMW

harddrivespecialist · Posted: Mon Dec 07, 2009 2:49 pm Post subject:

Does your 160GB drive spins up?
_________________
www.datarecoveryne.com

actormw · Officially active! Joined: 07 Dec 2009 Posts: 2

No, no spin up or any sound. It worked just fine one day and the next, nothing. It was in an external enclosure but the case is fine because I've swapped other drives into it and they work. Just the one drive does nothing.

sunnydreamspace · Deadharddrive regular +5 Joined: 04 Jan 2009 Posts: 540

hi,
seems you got PCB problem. please contact me by email. i could help you solve it out. thanks.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace

Eric Lee · Posted: Tue Dec 08, 2009 9:21 am Post subject:

Hi,

We have this kinds of working PCB in stock too, pls contact my hotmail to see if we can help.

Thanks
Eric
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail：eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype：eric.lee1984

doug2060 · Deadharddrive regular +2 Joined: 13 May 2006 Posts: 62

For the lowest price try here:

http://www.softcom.com.my/

Lowest prices anywhere. They've helpedd me out several times!