| View previous topic :: View next topic |
| Author |
Message |
ripface
Posted once
Joined: 21 Sep 2009
Posts: 1
|
 Posted: Tue Sep 22, 2009 1:42 pm Post subject: RAID0 |
 |
|
Hey Guys 'n' Gals,
Does anyone have any experience with de-striping a RAID0 raid set? MY Hitachi Deskstar 500Gb went "POP", and I have just managed to resurrect it by desoldering the burnt component ... the Transient Voltage Suppressor diode if you are interested.
The drive now spins up and is recognised by the BIOS, but I really don't want to put it back in my Freecom Datatank enclosure in case the PSU on that device is suspect.
Can anyone recomment RAID analyzing and destriping software. I can connect up both RAID0 drives to my PC with USB/SATA adapters, but need to try and rescue the data off the raid set.
Cheers,
Ripface. |
|
| Back to top |
|
 |
|
|
deadhardrive
Active contributor
Joined: 27 Apr 2011
Posts: 7
Location: Shanghai
|
| Posted: Sun May 01, 2011 7:08 am Post subject: |
|
|
Hi,
You can go with R-studio..does the job well
Cheers
_________________
Discount Data Recovery In China on Dead Hard Drive, RAID and SSD: www.deadhardrive.com
Panne disque dur HS. |
|
| Back to top |
|
|
sunnydreamspace
Deadharddrive regular +5
Joined: 04 Jan 2009
Posts: 540
|
| Posted: Mon May 02, 2011 6:14 am Post subject: |
|
|
if you don't have much experience with raid. build image for both drive and process with image. take care your data. 
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
