View previous topic :: View next topic |
Author |
Message |
djscoutmaster Officially active!
Joined: 06 Jul 2009 Posts: 2
|
Posted: Mon Jul 06, 2009 7:58 pm Post subject: I Possibly need a PCM Seagate Barracuda 7200.11 750gig |
|
|
I have a Seagate Barracuda 7200.11 750gig st31000340as
Bios does not recognize it but the hard drive spins up and run with no issues how do i go about getting the right PCM board. will any 7200.11 board work? what is my best bet? should i buy a drive off ebay and switch the platters?
i need to recover this information |
|
Back to top |
|
|
|
Kit Deadharddrive regular +2
Joined: 10 Nov 2008 Posts: 56
|
Posted: Tue Jul 07, 2009 2:01 am Post subject: |
|
|
Stop! Your problem must solve recovery specialist only. You can not get result if you change PCB or platters. hard drive spin up - then PCB is working. If you change platters, then you lost your data!! Where you live? may be i can help you. |
|
Back to top |
|
|
djscoutmaster Officially active!
Joined: 06 Jul 2009 Posts: 2
|
|
Back to top |
|
|
harddrivespecialist Deadharddrive regular +4
Joined: 29 Dec 2007 Posts: 471 Location: Providence, RI. Boston, MA USA
|
Posted: Wed Jul 08, 2009 11:38 pm Post subject: |
|
|
This is most common issue with this model of Seagate.
Check your PM. _________________ www.datarecoveryne.com |
|
Back to top |
|
|
Kit Deadharddrive regular +2
Joined: 10 Nov 2008 Posts: 56
|
Posted: Thu Jul 09, 2009 2:29 am Post subject: |
|
|
In case like you, as rule, data recovery technicion with special command read your disk. He did't changes PCB. |
|
Back to top |
|
|
|