| View previous topic :: View next topic |
| Author |
Message |
andres
Guest
|
 Posted: Thu Nov 03, 2005 11:15 pm Post subject: can i replace circuit board in my wd80bb ? |
 |
|
| the circuit board logic of the my hd wd800bb-75dka0 dead. can i replace it by circuit logic of wd800bb-00jhc0 ??? |
|
| Back to top |
|
 |
|
|
Subzuki
Deadharddrive regular
Joined: 30 Oct 2005
Posts: 22
Location: Ottawa, Ontario, Canada EH?
|
| Posted: Sun Nov 06, 2005 3:52 am Post subject: can i replace circuit board in my wd80bb |
|
|
Is it the same model? (Protege,Caviar)
It must be the same model. Can be a larger capacity drive from the same model family.
Does it have the same C.H.S.? (Cylinders,heads,sectors)
Firmware may play a role, although I never took notice of the firmware in my situations. They may very well have been the same, but I never looked. My belief (so far) is the C.H.S.
If it has different C.H.S, I don't think it will work.
Also a *slim* chance the voltages may be different.
Subzuki |
|
| Back to top |
|
|
Guest
|
| Posted: Mon Jan 16, 2006 11:32 am Post subject: |
|
|
you must match up with the right logic board and allso the firmware software of the hard drive
if you dont your have a hard drive that picks up in the bios but will not read any information of the platters because of the wrong information |
|
| Back to top |
|
|
oppo
Posted once
Joined: 25 Jun 2007
Posts: 1
|
| Posted: Mon Jun 25, 2007 12:38 am Post subject: WD800BB-75DKA0 |
|
|
I'm looking for the same model drive. Any chance your done with it and can pass it on? My board is dead and I'm hoping to recover some data.
Thanks, Paul |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
