View previous topic :: View next topic |
Author |
Message |
anubis68 Officially active!
Joined: 16 Sep 2006 Posts: 3
|
Posted: Sat Sep 16, 2006 12:35 pm Post subject: WTD seagate ST3300831A pcb |
|
|
s/n 4NF189FE
model ST3300831A
p/n 9y7284-301
firmware 3.06
Thanks in advance |
|
Back to top |
|
|
|
hdd Deadharddrive regular +1
Joined: 26 Jul 2006 Posts: 45
|
Posted: Mon Sep 18, 2006 10:18 pm Post subject: |
|
|
www.ultratec.co.uk has 18 pieces of your model in stock |
|
Back to top |
|
|
anubis68 Officially active!
Joined: 16 Sep 2006 Posts: 3
|
Posted: Tue Sep 19, 2006 11:11 am Post subject: |
|
|
Hi been all through the pcb boards on ultratec and cant find mine listed any where on the site |
|
Back to top |
|
|
gurdain Active contributor
Joined: 16 Feb 2007 Posts: 6
|
Posted: Sun Feb 18, 2007 4:11 am Post subject: WOW |
|
|
Hello
Like you, I have been searching non stop for PCB board for this drive with firmware version 3.02 however
If your problem is related to one of the diodes burning out on the PCB board near the power supply then I have just found the fix
It took me 3 seconds
http://forum.hddguru.com/help-with-two-seagate-hdd-vt6664.html
Break the Diode completely so it is not connected and wha hey! The drive is now powering on
This won't work if this was the problem but try it if you have a burning diode
Picture is available on the link |
|
Back to top |
|
|
|