| View previous topic :: View next topic |
| Author |
Message |
monkeyboy
Posted once
Joined: 06 Nov 2006
Posts: 1
|
 Posted: Mon Nov 06, 2006 7:18 am Post subject: what info on maxtor hard drive must i match to swap pcb? |
 |
|
hi, the pcb on my hard drive in an external case got fried by being plugged in to the wrong power supply, just as i was about to back up. i lost 90GB of precious business and personal files. i need a pcb for maxtor diamondmax 10 120GB SATA150 HDD, code BANC19J0, part number 6B120M0A4580A. the number on the pcb is 301931102. the manufacture date is 07SEP2004. the upc sticker on the pcb reads JABFQAGM R5GBP2 06084LEJHT. the largest chip reads:
agere oscar ES-D4
040118900
oscar-ESD4-WF
0425T
6056543
what is the info i need to match in order to find a compatible pcb? |
|
| Back to top |
|
 |
|
|
mitsievo
Active contributor
Joined: 13 Sep 2006
Posts: 7
|
| Posted: Sun Dec 24, 2006 2:06 pm Post subject: |
|
|
Hi,
It is important to match the following details:
120GB SATA150
6B120M0A4580A
The firmware
Try and get a pcb which is within 4 weeks of the original maufacturing.
I would recommend using ultratech to source a new pcb.
Hope this helps and good luck
Regards
Ad |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
