| View previous topic :: View next topic |
| Author |
Message |
crusty
Officially active!
Joined: 26 Jul 2006
Posts: 2
|
 Posted: Wed Jul 26, 2006 2:06 am Post subject: WANTED: Western Digital WD1200JB-00EVA0 Logic Board |
 |
|
An incorrect external USB case power supply voltage has resulted in a dead hard drive. I am looking for someone with the same drive so I can do a logic board swap.
Model is WD1200JB-00EVA0
Date, 14 March 2004
DCM: HSBHCTJCH
Thanks. |
|
| Back to top |
|
 |
|
|
crusty
Officially active!
Joined: 26 Jul 2006
Posts: 2
|
| Posted: Mon Jul 31, 2006 11:17 pm Post subject: |
|
|
I contacted ultratec.co.uk, while they didn't have it available initially, they came back 2 days later & have found one.
However there is a very slight difference in the PCB number
My drive had a PCB number of:
2061-001179-000 dk
while the one ultratec found was:
2061-001179-000 dm
From peoples experience out there, is this close enough for the firmware to be the same?
I do have to say that Ultratec would have to be the best resource for someone looking for hard drive bits. Very helpful and very fast response. |
|
| Back to top |
|
|
mykgerard
Posted once
Joined: 19 Sep 2006
Posts: 1
|
| Posted: Tue Sep 19, 2006 12:04 pm Post subject: |
|
|
Hey,
did this end up working out for you? I have the exact same problem (same exact messed up pcb as well)
I just ordered one on ebay that just has the D (no K) I'm really crossing my fingers on this! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
