| View previous topic :: View next topic |
| Author |
Message |
IBROX
Officially active!
Joined: 20 Jan 2009
Posts: 3
|
 Posted: Tue Jan 20, 2009 7:45 pm Post subject: Wanted Seagate Barracuda 7200.11 Logic Board |
 |
|
Seagate Barracuda 7200.11 1000 Gbytes
S/N - 3Q0AZNW
St31000340aS
P/N: 9BX158-568
Firmware - 8D81
Date Code: 08412
Site Code: AMKSPR
+5V 0.065A
+12V 0.6A
I would appreciate any help on this as I need to get my work files off of this drive Thanks
IBROX |
|
| Back to top |
|
 |
|
|
harddrivespecialist
Deadharddrive regular +4
Joined: 29 Dec 2007
Posts: 471
Location: Providence, RI. Boston, MA USA
|
| Posted: Tue Jan 20, 2009 11:22 pm Post subject: |
|
|
Why you believe your board is bad?
Do you see any burned chips?
Can you post a picture of your board?
_________________
www.datarecoveryne.com |
|
| Back to top |
|
|
IBROX
Officially active!
Joined: 20 Jan 2009
Posts: 3
|
| Posted: Wed Jan 21, 2009 12:39 am Post subject: |
|
|
I have read that swapping over the boards may do the trick as i have not taken it apart yet then i can’t see underneath the board the only picture I have would be of the circuit side rather than the component side.
To explain my drive I can not power it up there is no sound as no power so only thing is to try and swap logic board.
but to answer your question no I can't See anything wrong
IBROX |
|
| Back to top |
|
|
crazzeee
Officially active!
Joined: 01 Jun 2009
Posts: 2
|
| Posted: Mon Jun 01, 2009 1:34 am Post subject: re: |
|
|
did you get this sorted?
my drive just failed...exactly the same drive so curious...
However there is power in mine as I can here it click and spin when powered...but thats it...not recognised...and no signs of burns on board...basically failed when power was cut, never came back with the power...
If anyone else got any ideas that would be great...thanks |
|
| Back to top |
|
|
Eric Lee
Deadharddrive regular +4
Joined: 26 Apr 2009
Posts: 308
Location: China
|
| Posted: Mon Jun 01, 2009 3:54 am Post subject: Re: re: |
|
|
| crazzeee wrote: | did you get this sorted?
my drive just failed...exactly the same drive so curious...
However there is power in mine as I can here it click and spin when powered...but thats it...not recognised...and no signs of burns on board...basically failed when power was cut, never came back with the power...
If anyone else got any ideas that would be great...thanks |
Hi,
May I know does you HDD 1. Complete not rotate (spin) and off? or 2. Could rotate (spin) and have power, but just could not recognize the data in your computer?
If it's 1, I think you HDD may could be repaired by changing PCB. If it's 2, only change PCB is not enough. You have to find a specialist or data recovery company.
If you sure it's 1 situation, pls send me high quality picture of both side of your PCB to my email, I could help, my email: eric_lee8341@hotmail.com
Thanks.
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail：eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype：eric.lee1984 |
|
| Back to top |
|
|
sunnydreamspace
Deadharddrive regular +5
Joined: 04 Jan 2009
Posts: 540
|
| Posted: Tue Jun 02, 2009 12:50 am Post subject: |
|
|
hi,
please contact me by email if you need help. i would like to help you take off data. thanks.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace |
|
| Back to top |
|
|
crazzeee
Officially active!
Joined: 01 Jun 2009
Posts: 2
|
| Posted: Thu Jun 04, 2009 1:34 am Post subject: |
|
|
| sounds like complete recovery needed... |
|
| Back to top |
|
|
cheadledatarecovery1
Deadharddrive regular +1
Joined: 22 Feb 2008
Posts: 33
|
| Posted: Wed Jun 17, 2009 9:19 am Post subject: |
|
|
You cannot do a straight swap of a PCB on Seagate Barracuda 11 series drive. The reason is because the ROM content is adaptive to your drive. This means that it is necessary to physically remove the ROM chip and swap it also. Unless you are good with a soldering iron don't bother - if you damage the ROM chip there will be no way of recovering your data.
All the best,
John
Dr. John C. Reid
Cheadle Data Recovery
Manchester ICT Consultancy
0161 408 4857
Skype: cheadledatarecovery
http://www.cheadledatarecovery.co.uk/ |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
