jsoap
Posted once
Joined: 02 Oct 2008
Posts: 1
|
 Posted: Thu Oct 02, 2008 9:10 am Post subject: Seagate ST3300622A 300GB IDE board needed |
 |
|
Hi,
Drive stopped being recognised in the bios on boot. No prior symptoms.
Tested in several PCs, bios tries for 1 or 2 mins to detect drive and then moves on.
Drive spins up, but powers off after 2 minutes.
When powering up the drive makes a single, very quiet, click. When power is removed, there is often a short quiet buzz, like a mosquito. When the motor comes to rest there is a another single, very quiet, click.
Model: ST3300622A
p/n: 9BD044-320
Firmware: 3.AND
Date: 06317
Site AMK Singapore
and yes the part number and firmware are correct (could not find any other instances of this part or firmware on the net)
Thanks |
|
dslaton
Posted once
Joined: 17 Dec 2008
Posts: 1
Location: Huntsville, AL
|
| Posted: Wed Dec 17, 2008 2:58 am Post subject: Seagate ST3300622A 300GB IDE board needed |
|
|
Hello,
Were you able to locate a board for your drive? Did it fix your problem? I'm wondering because I am having a similar problem with my drive. I'm hoping a PCB swap (assuming I can find one) will fix enough where I can recover the data.
Thanks
David |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
