| View previous topic :: View next topic |
| Author |
Message |
Kieranlaxen
Officially active!
Joined: 01 Aug 2008
Posts: 3
|
 Posted: Fri Aug 01, 2008 11:22 am Post subject: Swapping IDE PCB for SATA PCB? |
 |
|
I have a seagate barracuda 7200.10 320 GB st3320820A hard drive that is not working so i want to swap the PCB board. The only matching PCB i have found has a SATA connection instead of an IDE connection.
The details of my PCB are:
P/N: 9BJ03G--560
Firmware: 3.AFE
Site Code: TK
The deatils of the PCB i'm thinking of replacing it with are:
P/N: 9bj13g-060
Firmware: 3.AFE
Site Code: TK
The only difference is the connection type ie. SATA instead of IDE.
Will this work?
If not does anyone have a drive i can buy that matches mine?
Thanks |
|
| Back to top |
|
 |
|
|
Starling
Active contributor
Joined: 25 Oct 2008
Posts: 7
|
| Posted: Sat Oct 25, 2008 3:31 am Post subject: |
|
|
| No, that won't work like that. You have to find exact match if you don't have right tools to adapt firmware to SATA board. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
