| View previous topic :: View next topic |
| Author |
Message |
ranman
Officially active!
Joined: 20 Jul 2008
Posts: 2
|
 Posted: Sun Jul 20, 2008 7:29 pm Post subject: Seagate PCB replaced(firmware&model match).Still not wor |
 |
|
I replaced the PCB on a:
Seagate Barracuda 7200.9
ST3300622AS
Firmware 3.AAH
Date Code 06476
Site Code WU
with a PCB from a (only the site code is off)
Seagate Barracuda 7200.9
ST3300622AS
Firmware 3.AAH
Date Code 06445
Site Code: TK
And the drive will not be detected. I have confirmed the new drive works with the new PCB (so the PCB is good), but my old drive will not detect with the new PCB. Is there anything else I can try? I am pretty sure only the PCB was damaged on the old drive as I can see the fried component.
thanks in advance for any help. |
|
| Back to top |
|
 |
|
|
cheadledatarecovery1
Deadharddrive regular +1
Joined: 22 Feb 2008
Posts: 33
|
| Posted: Wed Oct 08, 2008 11:18 pm Post subject: |
|
|
Well done for finding such a close match. Unfortunately it is one of 3 things:
1) A site code mismatch:
on 7200.11 site code is VERY important
on 7200.10 it is sometimes important
on 7200.9 I did think it was interchangeable
2) You have a firmware failure - this needs to be manipulate by special hardware
3) you have a head failure.
If you need any help get in touch,
John
http://www.cheadledatarecovery.co.uk |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
