| View previous topic :: View next topic |
| Author |
Message |
webdevour
Officially active!
Joined: 23 Apr 2010
Posts: 4
|
 Posted: Fri Apr 23, 2010 9:02 pm Post subject: Needed: Logic Board for WD4000KD-00NAB0 WD Caviar SE16 400GB |
 |
|
my 400GB backup drive just took a **** with 300GB worth of valuable and invaluable data saved on it. I need to repair this drive, and this is my only option at this point. I need the green PCB board, or entire hard drive if you don't need it, for a 400GB Western Digital Caviar SE16...
model WD4000KD-00NAB0
dcm HBHCAJAA
I'm not sure what these go for, name a price if you have what I need and I'll see what I can do. Thanks!
p.s. I can hear the platters spinning when I twist the drive, the logic board should fix it right up, right? |
|
| Back to top |
|
 |
|
|
sunnydreamspace
Deadharddrive regular +5
Joined: 04 Jan 2009
Posts: 540
|
| Posted: Sat Apr 24, 2010 12:03 am Post subject: |
|
|
hi,
have it in stock. does the model is 2060-701310-004??? please contact me by email or MSN as i need more detail for your drive. i will help you estimate what's the problem with detail. thanks.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace |
|
| Back to top |
|
|
webdevour
Officially active!
Joined: 23 Apr 2010
Posts: 4
|
| Posted: Sat Apr 24, 2010 4:49 am Post subject: |
|
|
Hi, thanks for your reply.
The only number I see that matches anything close to the model number you gave is 2061-701310-C00 AD |
|
| Back to top |
|
|
fzabkar
Deadharddrive regular +3
Joined: 02 Apr 2010
Posts: 210
|
| Posted: Sat Apr 24, 2010 5:02 am Post subject: Re: Needed: Logic Board for WD4000KD-00NAB0 WD Caviar SE16 4 |
|
|
The rule of thumb appears to be that, if a drive spins up, or if it tries to spin up, then the board is probably OK. Instead the problem is most likely with the HDA (head/disc assembly).
If, OTOH, the drive makes no noise at all, and does not attempt to spin up, then the board is probably faulty.
In any case, when swapping boards, be prepared to transplant any serial EEPROM chip from patient to donor. This chip contains unique drive specific calibration data. Can you see an 8-pin chip at U12? |
|
| Back to top |
|
|
Eric Lee
Deadharddrive regular +4
Joined: 26 Apr 2009
Posts: 308
Location: China
|
| Posted: Sat Apr 24, 2010 8:23 am Post subject: Re: Needed: Logic Board for WD4000KD-00NAB0 WD Caviar SE16 4 |
|
|
| webdevour wrote: |
p.s. I can hear the platters spinning when I twist the drive, the logic board should fix it right up, right? |
If your drive spins up, it's most likely not a board problem.
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail：eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype：eric.lee1984 |
|
| Back to top |
|
|
webdevour
Officially active!
Joined: 23 Apr 2010
Posts: 4
|
| Posted: Sun Apr 25, 2010 2:55 am Post subject: Re: Needed: Logic Board for WD4000KD-00NAB0 WD Caviar SE16 4 |
|
|
| fzabkar wrote: | The rule of thumb appears to be that, if a drive spins up, or if it tries to spin up, then the board is probably OK. Instead the problem is most likely with the HDA (head/disc assembly).
If, OTOH, the drive makes no noise at all, and does not attempt to spin up, then the board is probably faulty.
In any case, when swapping boards, be prepared to transplant any serial EEPROM chip from patient to donor. This chip contains unique drive specific calibration data. Can you see an 8-pin chip at U12? |
Hi, is the U12 located on the inside portion of the board? I don't see anything marked U12 on the underside of the drive, and I haven't yet taken the logic board off the drive.
| Eric Lee wrote: | | webdevour wrote: |
p.s. I can hear the platters spinning when I twist the drive, the logic board should fix it right up, right? |
If your drive spins up, it's most likely not a board problem. |
The drive only spins when I twist is manually in my hands... There is no power whatsoever nor any attempt to spin up when it's plugged in.
I also need to make a correction, the number I posted before was on the barcode, not the actual board.. the board's serial number is 2060-701310-004 Rev A |
|
| Back to top |
|
|
webdevour
Officially active!
Joined: 23 Apr 2010
Posts: 4
|
| Posted: Sun Apr 25, 2010 5:55 am Post subject: |
|
|
| Would I be able to use a board from a WD4000YR-00PLB0 successfully as long as it shares the 2060-701310-004 REV A model number? I can swap my U12 out no problem once I get a star wrench. |
|
| Back to top |
|
|
Eric Lee
Deadharddrive regular +4
Joined: 26 Apr 2009
Posts: 308
Location: China
|
| Posted: Sun Apr 25, 2010 8:25 am Post subject: |
|
|
| webdevour wrote: | | 2060-701310-004 REV A model number |
We have this working PCB in stock, new and unused.
We suggest you find a local shop to make a diagnosis, after confirm your HDD is a PCB problem, pls contact my hotmail.
Thanks
Eric
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail：eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype：eric.lee1984 |
|
| Back to top |
|
|
harddrivespecialist
Deadharddrive regular +4
Joined: 29 Dec 2007
Posts: 471
Location: Providence, RI. Boston, MA USA
|
| Posted: Mon Apr 26, 2010 7:17 pm Post subject: Re: Needed: Logic Board for WD4000KD-00NAB0 WD Caviar SE16 4 |
|
|
| webdevour wrote: | | I can hear the platters spinning when I twist the drive, the logic board should fix it right up, right? |
You might simply have a bad cable connection to a PCB.
_________________
www.datarecoveryne.com |
|
| Back to top |
|
|
sunnydreamspace
Deadharddrive regular +5
Joined: 04 Jan 2009
Posts: 540
|
| Posted: Tue Apr 27, 2010 2:03 pm Post subject: Re: Needed: Logic Board for WD4000KD-00NAB0 WD Caviar SE16 4 |
|
|
| Quote: | The drive only spins when I twist is manually in my hands...
|
i have this PCB in stock. please contact me by email or MSN if need. also we can chat in MSN that more easy to solve it out.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace |
|
| Back to top |
|
|
fzabkar
Deadharddrive regular +3
Joined: 02 Apr 2010
Posts: 210
|
| Posted: Sun May 02, 2010 3:37 am Post subject: Re: Needed: Logic Board for WD4000KD-00NAB0 WD Caviar SE16 4 |
|
|
[quote="webdevour"]p.s. I can hear the platters spinning when I twist the drive, the logic board should fix it right up, right?[/quote]
Check the connections under the board. Give the motor contacts and preamp contacts a scrub with a soft white pencil eraser. |
|
| Back to top |
|
|
superbiiz
Deadharddrive regular
Joined: 25 May 2011
Posts: 24
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
