www.deadharddrive.com

Solstar · Deadharddrive regular Joined: 20 Aug 2009 Posts: 10

hi all,i need urgently two pcb for two maxtor diamondmax hd,one is 320 gb,the other 250 gb.for the 320 gb,the chip code is 100404195.for the 250 gb one,the chip code is 100407840

Eric Lee · Posted: Thu Aug 20, 2009 4:08 pm Post subject:

Hi,

I have both of them, pls contact my homail.

Thanks
Eric
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail：eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype：eric.lee1984

sunnydreamspace · Deadharddrive regular +5 Joined: 04 Jan 2009 Posts: 540

hi,
i have these PCB in stock. but i need more detail for confirm which one you have. please contact me by email. thanks.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace

Solstar · Deadharddrive regular Joined: 20 Aug 2009 Posts: 10

any help please,i'm still looking urgently for these pieces thanks

EDIT:only people from europe or in the usa at best,i can't afford to pay 100$+ for shippings from china or hong kong,thanks

Solstar · Deadharddrive regular Joined: 20 Aug 2009 Posts: 10

I still need those pcb boards if someone can help urgently thanks

Solstar · Deadharddrive regular Joined: 20 Aug 2009 Posts: 10

as suggested by another member,i'll try to descrive which is the problem and later post some photos of the pcb.here's what:i used these two hd externally,with two cables,and i left them in table,but one day while i was cleaning they both fell down on the floor.in one of them,one of the black"caps" that's on the board,its similar to a liquorice pill,i don't know the name or for what it is,popped out,and i think i would've needed a micro welder to weld it back in place.as for the other one,i think its somethingrelated to the power source slot,as i doesn't even hear the "boot" spinnng sounce when i plug it into the power cable,but i'm sure its the pcb board,not the hd itself,as a friend of mine tried the same with another pcb boarde has,and works fine

fzabkar · Deadharddrive regular +3 Joined: 02 Apr 2010 Posts: 210

If a straight PCB swap worked for you, then you are lucky. Recent drives have unique drive specific calibration data that are stored is an 8-pin serial EEPROM chip. Usually you need to transplant this chip from patient to donor.

Are these your boards?

http://ep.yimg.com/ca/I/yhst-44463692235217_2097_3299566

http://ep.yimg.com/ca/I/yhst-44463692235217_2097_1076169

Solstar · Deadharddrive regular Joined: 20 Aug 2009 Posts: 10

can't see your pics there ,but no they're not those .here the yare,i'm still looking if someone can help me

[img]http://sn143w.snt143.mail.live.com/att/GetAttachment.aspx?tnail=0&messageId=775d5db7-9da5-40b0-bc79-2a1d8f641392&Aux=444|0|8CC0B2080CA5500||0|0|3||&maxwidth=220&maxheight=160&size=Att[/img]

fzabkar · Deadharddrive regular +3 Joined: 02 Apr 2010 Posts: 210

I can't see your picture, either. The link sends me to a login page. :-(

Anyway, if you need to purchase a PCB, try the following vendor:
http://www.onepcbsolution.com/

His price is US$40 including postage within USA, plus $10 for a ROM transfer, if required.

That said, be prepared for stiction or seized spindle problems. :-(

BTW, I am not associated with any supplier.