| View previous topic :: View next topic |
| Author |
Message |
sammad2
Posted once
Joined: 08 Aug 2008
Posts: 1
|
 Posted: Fri Aug 08, 2008 2:07 pm Post subject: **WANTED** wd2500JD-75HBB0 PCB |
 |
|
Hi Folks. I need a PCB for a wd2500JD-75HBB0. Any help please is appreciated. Thanks
sammad2 |
|
| Back to top |
|
 |
|
|
sammad
Officially active!
Joined: 08 Aug 2008
Posts: 3
|
| Posted: Sat Sep 27, 2008 1:35 pm Post subject: |
|
|
okay, I have replaced the old PCB with one purchased from harddrivespecialist (thank you!). I am getting the drive to spin up and down now but am getting 6 clicks repetively.
FYI-I have not swapped the ROM
Any suggestions? please.
Thank you, sammad |
|
| Back to top |
|
|
sammad
Officially active!
Joined: 08 Aug 2008
Posts: 3
|
| Posted: Thu Oct 23, 2008 2:41 am Post subject: |
|
|
I had harddrivespecialist swap the rom and it worked perfectly. A special thanks to harddrivespecialist who provided the PCB as well as soldered the board.
Very honest and very fair priced.
Thanks so much!
Sammad  |
|
| Back to top |
|
|
robqx4
Posted once
Joined: 17 Mar 2009
Posts: 1
|
| Posted: Tue Mar 17, 2009 6:47 am Post subject: Need same board...... |
|
|
Hi Sammad,
Can you tell me who this "harddrivespecialist" is.
I have the exact same hard drive that I need a PCB board for.
Your help would be GREATLY appreciated!
Thanks,
Rob |
|
| Back to top |
|
|
harddrivespecialist
Deadharddrive regular +4
Joined: 29 Dec 2007
Posts: 471
Location: Providence, RI. Boston, MA USA
|
| Posted: Tue Mar 17, 2009 3:22 pm Post subject: |
|
|
| sammad wrote: | I had harddrivespecialist swap the rom and it worked perfectly. A special thanks to harddrivespecialist who provided the PCB as well as soldered the board.
Very honest and very fair priced.
Thanks so much!
Sammad |
Thank you very much for your feedback.
_________________
www.datarecoveryne.com |
|
| Back to top |
|
|
sammad
Officially active!
Joined: 08 Aug 2008
Posts: 3
|
| Posted: Wed Mar 18, 2009 1:48 am Post subject: Re: Need same board...... |
|
|
| robqx4 wrote: | Hi Sammad,
Can you tell me who this "harddrivespecialist" is.
I have the exact same hard drive that I need a PCB board for.
Your help would be GREATLY appreciated!
Thanks,
Rob |
Hi Rob,
I found Harddrivespecialist on this forum and PM'd him to see if he had a PCB for my drive. I sent my drive to him due to the fact that I needed a ROM swap. I would highly recommend his services! I found him to be honest and he did an outstanding job. I would PM him and see if he has a PCB for your drive. I would not hesitate to use him again if needed.
Let me know if you have any additional questions.
Sammad |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
