www.deadharddrive.com

Noxz

IC35L060AVER07-0 IBM Deskstar 61.5GB ATA Logic Board
P/N 07N6655
S/N TZM21156
MLC H32161
Numbers on Board:
07N6570
H31735_
MzG129
VRXN
second sticker on Board
123598M
_________________
One Copy Good Is; Many Copies Better Are

harddrivespecialist · Posted: Fri Dec 12, 2008 11:23 pm Post subject:

I have a board for this drive.
Can you specify why you believe your board is causing a problem?
_________________
www.datarecoveryne.com

Noxz · Posted: Fri Dec 12, 2008 11:56 pm Post subject:

well, the problem was after several powerdips from snow, it boote dup fine, but after transfering a 100mb big mp3 over, I overfiulled, and then ata2 errors(linux) started to appear, and now it wont mount anymore. The BIOS wont detect the hard drive neither, unless I have only the baord unattatched ot the disk, when I did this, it actually fixed the chatter(not click, the other reoccuring problem) but now it wont recognize anymore...do dont connect it without it being connected to the disk.
The only step next to do would be to put in the same logic board and see if it works or not.
Or send it to a data recovery place
_________________
One Copy Good Is; Many Copies Better Are

harddrivespecialist · Posted: Sat Dec 13, 2008 1:28 am Post subject:

If your drive spins up, there is 95% chance that you have some other problem than PCB.
In a lot of cases, then more you mess with a drive=to less data recovered or higher price for a recovery.
_________________
www.datarecoveryne.com

Noxz · Posted: Sat Dec 13, 2008 1:56 am Post subject:

the motor spins, but it doesnt have the full spinup sound that I am used to
_________________
One Copy Good Is; Many Copies Better Are