| View previous topic :: View next topic |
| Author |
Message |
Guest
|
 Posted: Wed Jan 11, 2006 8:58 pm Post subject: logic board replacement |
 |
|
| this sucks i had to do something moronic and plug in a fan wrong way in 3 pin connector.and it was plugged into one of the molex that connects to the hard drive.so i hear a buzz and hard drive shuts off and pc shuts down also.turn it back on its ok but hard drive wont spin or be recognized.i had a hard drive same size but mayeb not same model i tool apart and kept some parts.but i decided to toss the logic board which would of saved me from buying another hard drive.i justh hope it is the board and not the heads i know my data is fine.strange thing is i looked at the board and see no damge at all.but i know there is since the drive wont work. |
|
| Back to top |
|
 |
|
|
Guest
|
| Posted: Mon Jan 16, 2006 11:22 am Post subject: |
|
|
its more likely that you friend the controller chip itself and the platter should be fine.
but you must get the right logic board for it to work |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
