View previous topic :: View next topic |
Author |
Message |
q00u Officially active!
Joined: 15 Dec 2006 Posts: 4
|
Posted: Fri Dec 15, 2006 2:43 pm Post subject: Wanted: ST3300831A, Firmware: 3.01 |
|
|
Wanted: ST3300831A, Firmware: 3.01
P/N: 9Y7284-301 |
|
Back to top |
|
|
|
gurdain Active contributor
Joined: 16 Feb 2007 Posts: 6
|
Posted: Sun Feb 18, 2007 4:10 am Post subject: WOW |
|
|
Hello
Like you, I have been searching non stop for PCB board for this drive with firmware version 3.02 however
If your problem is related to one of the diodes burning out on the PCB board near the power supply then I have just found the fix
It took me 3 seconds
http://forum.hddguru.com/help-with-two-seagate-hdd-vt6664.html
Break the Diode completely so it is not connected and wha hey! The drive is now powering on
This won't work if this was the problem but try it if you have a burning diode
Picture is available on the link |
|
Back to top |
|
|
q00u Officially active!
Joined: 15 Dec 2006 Posts: 4
|
Posted: Tue Mar 13, 2007 10:58 pm Post subject: |
|
|
My problem is not the diode. The diode didn't burn out on my board. Thanks for the suggestion though. I hope it can help someone else. |
|
Back to top |
|
|
zmefly Deadharddrive regular
Joined: 14 Nov 2006 Posts: 10
|
Posted: Fri Mar 30, 2007 3:40 pm Post subject: |
|
|
you have PM |
|
Back to top |
|
|
|